ACTUALITE Aéronautique

Vous souhaitez réagir à ce message ? Créez un compte en quelques clics ou connectez-vous pour continuer.
ACTUALITE Aéronautique

ACTUALITE Aéronautique : Suivi et commentaire de l\'actualité aéronautique

Le Deal du moment : -47%
SAMSUNG T7 Shield Bleu – SSD Externe 1 To ...
Voir le deal
89.99 €

3 participants

    737-300 Southwest : Trou fuselage (1 avril 2011)


    Beochien
    Whisky Charlie


    737-300 Southwest : Trou fuselage (1 avril 2011) - Page 2 Empty Re: 737-300 Southwest : Trou fuselage (1 avril 2011)

    Message par Beochien Mer 13 Avr 2011 - 10:06

    Bonjour !

    De John Croft ! Blog sur FG !

    Les Lap Splice !

    http://htmlimg1.scribdassets.com/9bkulmawqox3clo/images/8-be3f0e396b.png

    http://htmlimg1.scribdassets.com/9bkulmawqox3clo/images/7-981c7d7f23.png

    http://www.flightglobal.com/blogs/as-the-croft-flies/

    Beochien
    Whisky Charlie


    737-300 Southwest : Trou fuselage (1 avril 2011) - Page 2 Empty Re: 737-300 Southwest : Trou fuselage (1 avril 2011)

    Message par Beochien Mer 13 Avr 2011 - 18:15

    Bonjour !

    Un article bien fait concernant la fatigue des 737 Classic ...
    Un peu drivé par les sécuritaires de service de l'aviation, ce n'est pas forcément un mal de mettre les agences au pied du mur !

    --------- Un lien de Hawaï et un extrait intéressant ----------

    http://www.hawaiinewsnow.com/story/14383500/faa-orders-inspections-of-737s-with-many-landings

    Since there are many lap joints in a single airliner, "if you tried to eddy current every lap joint on every plane, the amount of time and energy it would take would be literally staggering," Cox said.

    The FAA is also required by law to weigh the cost of the safety procedures it tells airlines to follow against the possible safety benefits. If there is no evidence of a previous safety problem, it becomes more difficult to justify the cost.

    "I don't think the public understands the bar that has to be cleared by regulatory agencies," said Bill Voss, president of the Flight Safety Foundation in Alexandria, Va., an aviation industry-funding organization that promotes safety.

    Investigators said the tear along a lap joint on the Southwest jet came despite a recent inspection where the plane was taken apart so that inspectors could see into places not normally visible.

    They found 21 instances of cracked frames, which are part of the fuselage, or cracked stringer clips, which help hold pieces of aircraft skin together.

    Earlier, NTSB investigators said they had found both cracks that were big enough to see with the naked eye but were hidden between overlapping pieces of metal. They said they had also found subsurface cracks.

    That's a significant number and should have been a warning to Southwest's maintenance team that there might be more extensive cracking that wasn't detectable by a visible inspection alone, Voss said.

    The plane "hasn't just had a lot of cycles, it has had cycles that have put some wear and tear on the structure," Voss said.

    Voss compared the inspection process to removing a tumor. Surgeons should "always check around to see if there are any nodes inflamed or whatever else around it. Depending upon what they find, they can go a step further," Voss said.

    Hersman noted that at 15 years, the Southwest plane had only reached what is considered midlife for an airliner.

    "If we think something needs to be done, whether the aircraft is 15 years old or 50 years old, we will address it," she said.

    JPRS

    Poncho (Admin)
    Whisky Charlie


    737-300 Southwest : Trou fuselage (1 avril 2011) - Page 2 Empty Re: 737-300 Southwest : Trou fuselage (1 avril 2011)

    Message par Poncho (Admin) Mer 27 Avr 2011 - 11:41

    Bonjour à tous
    Il apparaît désormais plausible que la seule fatigue n'explique pas tout l'incident...

    http://www.aviationweek.com/aw/generic/story.jsp?id=news/awx/2011/04/26/awx_04_26_2011_p0-315406.xml&headline=Questions%20Raised%20In%20Southwest%20Jet%20Probe&channel=mro


    etailed inspections of a Southwest Airlines jet that experienced a mid-flight fuselage rupture on April 1, 2011 have revealed possible manufacturing flaws and further evidence of fatigue cracks.

    A National Transportation Safety Board (NTSB) preliminary report released on Monday raised new questions about the process for bonding aluminum fuselage skin and how wear and tear may affect certain older model Boeing 737-300 series aircraft.

    An examination by safety board investigators of the plane and a cutaway of the damaged skin showed microscopic cracks extending from at least 42 of 58 rivet holes connected to the rupture. Cracks also extended in an area forward of the hole.

    A separate inspection of intact rivets showed imperfections in the location and size of several rivet holes, but the NTSB does not know if the problem is related to wear, manufacturing, or another cause.

    Additionally, evidence of Southwest’s blue livery paint was found inside a joint where the upper and lower fuselage skin meet and where microscopic cracks had been painted over.

    Boeing said in a statement that it could not speculate on what the NTSB’s preliminary findings might suggest about the root cause of the incident involving the 15-year-old aircraft.

    Southwest said in a statement that the initial findings “were another step in this ongoing investigation” and pledged cooperation with investigators and regulators “in an effort to determine the cause of events.”

    There were nearly six hundred 737-300, 400, 500 series planes made between 1993-2000 with fuselage assembly at the company’s Wichita, Kansas, facility. Boeing changed its 737 skin bonding techniques early on based on analysis and other factors including a similar incident in 1988 involving an Aloha Airlines 737-200. Boeing said it is unclear whether the change contributed to the Southwest incident.

    Boeing said it was working closely with the NTSB and any attempt to draw conclusions about the Southwest incident “would be premature and speculative.

    et là

    http://www.flightglobal.com/articles/2011/04/26/355924/x-rays-find-rivet-lapses-on-southwest-737-300.html

    Voilà à suivre donc
    Poncho (Admin)
    Poncho (Admin)
    Whisky Charlie


    737-300 Southwest : Trou fuselage (1 avril 2011) - Page 2 Empty Re: 737-300 Southwest : Trou fuselage (1 avril 2011)

    Message par Poncho (Admin) Mer 27 Avr 2011 - 11:42

    Je complète par un petit lien qui peut être utile

    Bonne journée

    http://www.ntsb.gov/pressrel/2011/110425.html


    _________________
    @avia.poncho

    Contenu sponsorisé


    737-300 Southwest : Trou fuselage (1 avril 2011) - Page 2 Empty Re: 737-300 Southwest : Trou fuselage (1 avril 2011)

    Message par Contenu sponsorisé


      La date/heure actuelle est Jeu 28 Nov 2024 - 2:20